![]() |
I spotted this link on another boat forum and though it might be of interest. It sort of takes the microcruiser concept down in scale a bit, but, if there was the ability to recharge en-route it might make an interesting and eye catching little river raid boat.
Jeremy |
![]() ![]() |
Ratcatcherjohn |
![]() |
Good afternoon Jeremy I think this is the same chap, the boat would appear to be even more "Raid Friendly" in our climate.
http://www.youtube.com/watch?v=XafQ0Ah1jx0&feature=player_embedded John Date: Thu, 6 Oct 2011 05:28:15 -0700 From: [hidden email] To: [hidden email] Subject: Dinky little electric boat I spotted this link on another boat forum and though it might be of interest. It sort of takes the microcruiser concept down in scale a bit, but, if there was the ability to recharge en-route it might make an interesting and eye catching little river raid boat. Jeremy If you reply to this email, your message will be added to the discussion below: http://uk-hbbr-forum.967333.n3.nabble.com/Dinky-little-electric-boat-tp3399472p3399472.html To unsubscribe from UK HBBR Forum, click here. |
![]() |
Hey John - I think Mik Storer has something that could easily be adapted for this kind of purpose. G From: Ratcatcherjohn [via UK HBBR Forum] <[hidden email]> To: gmatkin <[hidden email]> Sent: Thursday, 6 October 2011, 15:10 Subject: RE: Dinky little electric boat
Good afternoon Jeremy I think this is the same chap, the boat would appear to be even more "Raid Friendly" in our climate.
http://www.youtube.com/watch?v=XafQ0Ah1jx0&feature=player_embedded John Date: Thu, 6 Oct 2011 05:28:15 -0700 From: [hidden email] To: [hidden email] Subject: Dinky little electric boat I spotted this link on another boat forum and though it might be of interest. It sort of takes the microcruiser concept down in scale a bit, but, if there was the ability to recharge en-route it might make an interesting and eye catching little river raid boat. Jeremy If you reply to this email, your message will be added to the discussion below: http://uk-hbbr-forum.967333.n3.nabble.com/Dinky-little-electric-boat-tp3399472p3399472.html To unsubscribe from UK HBBR Forum, click here. If you reply to this email, your message will be added to the discussion below:
http://uk-hbbr-forum.967333.n3.nabble.com/Dinky-little-electric-boat-tp3399472p3399784.html
To unsubscribe from UK HBBR Forum, click here.
|
![]() |
Thanks for that, Gavin. I've been looking at some of Mik Storers designs and you're right, they might well adapt well to a boat like this.
Having been giving it some more thought, though, I'm not sure I really like the flat bottom going right to the bow. I know that the late Phil Bolger made many very good boats like this, but there's something aesthetically pleasing about having a nicer bow shape. I noticed the neat way that Mik Storer fitted small skegs at the bow and stern of his Quick Canoe, to make it track well and give it a bit nicer appearance when viewed side on. This gave me an idea (and yes, it is as wacky as making a boat from aluminium tubes and fabric.......). I have a couple of sheets of 3mm ply and at least one, maybe two, sheets of 1" thick insulation foam, left over from lining a covered aircraft trailer years ago. I'm wondering if I could make a flat bottomed, Bolger-like, hull, around 12 to 14ft long, using 1" foam sheet (suitably epoxy glassed on both sides) as the bottom panel. I know it will be more than strong enough and it should also be light (and add around 50kg of built in buoyancy). I could use the ply for the sides, with more glassed foam as the transom and full or part bulkheads. The ply would be bonded to the bottom panel in the same way as a stitch and glue boat, with glassed joints. This would give a very stiff and strong bottom panel that would also be well-insulated from the water, so making it a better proposition for sleeping in. If I was to then bond a keel strake at the bow, going back maybe 1/3 down the hull, rather like Mik Storers quick canoe, and then bond additional foam to the flat bit of the hull either side of it, I could sand the extra foam down to get a nicer transition from the flat run aft to a shapely bow. A layer of glass cloth over the whole lot and some filling and sanding and it should end up looking quite nice and yet still be simple to build and light. The glass over foam method is the same as I used for the stem and transom on Aero, so I know its quick and easy to do. The big problem is that, now I've started thinking about this boat I want to have a go and build it. Like some others I have too many boats and don't think I can get away with building yet another one very easily............. |
Free forum by Nabble | Edit this page |