Re: Rudder Failure - builder error!

Posted by BrianP on
URL: http://uk-hbbr-forum.61.s1.nabble.com/Rudder-Failure-builder-error-tp3338284p3345854.html

With a 9mm board only half the ply's are configured vertically to prevent bending, that's not much. Boards normally snap where they enter the case. I use some unidirectional glass that John Claridge has in stock (costs very little) when glassing boards to make sure they are stiff enough. Is there any chance you have room between the board and the case sides for a glass coating on each side, or even just one side? Brian