On 8 Jan 2011 at 9:54, Anders [via UK HBBR Forum] wrote:
>
>
> I use the wood dust that I have in my palm sander or the wood dust
> from my dust extraction in my guitar building workshop. Remember that
> for filleting, what you use for mixing into the epoxy needs to have
> some fibres. This makes it stronger than a powder mix. So it´ll
> always be a little bit coarse. In order to make it look more or less
> good, there´s noting like smoothening it out with a tea spoon when
> the mixture has set but before its to dry.
>
If you are glassing over it try to arrange things so that the
glassing can be done while the fillet is still soft. This will allow
you to get an almost perfect fillet without any sanding at all.
--
Hoping for calm nights
Alastair Law,
Yeovil, England.
<
http://www.little.jim.freeuk.com>