Woodflour??

classic Classic list List threaded Threaded
3 messages Options
Nesting Ray. Nesting Ray.
Reply | Threaded
Open this post in threaded view
|

Woodflour??

Hello each.

Have been making preparations for my new year project of building a nesting dinghy. Have decided on birch ply £15 per sheet plus George Osbourne's tip. Have stripped plenty of copper wire ready for stitching. Will be ordering some of Wests best epoxy, and was going to order some micro filler, but. I have been reading Sam Devlin's boat building book, and watching him on utube, he swears by using woodflour which is used in the food industry,as being the best stuff to mix with epoxy as a filler. It is really superfine wood dust, which sands well and is wood coloured, in stead of pink. But where to get the elusive stuff is the problem. Has anyone any idea's?  Merry Christmas to all. Ray
Port-Na-Storm Port-Na-Storm
Reply | Threaded
Open this post in threaded view
|

Re: Woodflour??

Hi Ray,
You get it from the little bag attached to your sander. Ordinary sawdust is too course.

I was wondering what went into my cheapo own brand muesli, now I know.

Cheers Grum.  
Timmo Timmo
Reply | Threaded
Open this post in threaded view
|

Re: Woodflour??

In reply to this post by Nesting Ray.
No idea where you buy wood flour. I get the stuff I use out of the filter bag on my random orbital sander after using 240 grit sandpaper. Don't know if it's as fine as commercial stuff but it matches colloidal silica in workability. Belt sander dust is noticeably coarser, but still useable where the cometics are less critical (like jointing where the larger grains help prevent joint starvation.) Have never yet deliberately sanded wood just to create wood flour but if you did you could probably colour match pretty exactly.

Have learned it's vital to keep the flour absolutely dry in airtight container. Years ago we mixed a batch for the end block on a kayak. The weather had been humid and we'd kept the flour in an open topped tub in the workshop. As the epoxy heated and set it frothed up quite spectacularly. Less sensitive when filleting but still worth taking care.

Re sanding well, it's not like fairing compound or microballoons, it's tough stuff (as it should be to hold panels together) but is possibly a fraction easier to sand than colloidal silica.

Merry Christmas from me too!

Tim.


On 20 Dec 2013, at 14:44, Nesting Ray. [via UK HBBR Forum] <[hidden email]> wrote:

> Hello each.
> But where to get the elusive stuff is the problem. Has anyone any idea's?  Merry Christmas to all. Ray